There are many nail coatings, but today we will talk about the shellac - a common type of gel polish, which became enjoy considerable interest in modern fashionistas due to the fact that absorbed the most outstanding quality of all of the usual nail polish, as well as modeling gel. The thematic market the product for the first time presented the company CND, but at the moment it is made, and many other manufacturers, but the name remains the same.
Why this cover has become so popular?
All existing shellacs borrowed from traditional varnishes pretty bright colors and natural shine. It should be noted the ultimate ease of application, which allows you to make quality manicure really quickly and without any complications with the use of expensive tools. Another advantage of the shellac in the absence of odor, and wearing period significantly increased. Erased slowly, so the selected nail art can remain intact for a long time. A manicure by such gel lacquer can be, even with minimal preparation of the nails, and the primer does not need to use.
Adhesion to the nail surface is quite high, but the coating will not cause any harm to the health of nails and hands in general. There are no difficulties with the application, which can also be regarded as an important advantage. It is worth noting that the distinguishing feature of shellac is that it can stay on nails for two or even three weeks, with easy transfers mechanical effects. When the time comes to remove the cover, it is sufficient to use a special tool. You can then immediately make a new manicure, nails without giving any break.
How to make a shellac manicure
The procedures in the cabin is too expensive, but a technology for performing manicure shellac quite difficult for self-application. need set of professional tools, Ultraviolet lamp for manicure, several kinds of coverings and so on.
Rules applying nail coating
At the initial stage should be made hygienic manicure on traditional technology, ie to remove the cuticle and to shape each claw. It so happens that not a form of nail you will have trouble, because originally it was, what you need, but in this case it is still all they should be a little sawed. If we talk about the shellac applied in specialized showrooms, the master initially make a dry manicure, thus it is necessary several times treated nails antibacterial compounds.
As for the polishing, it can be done a couple of times throughout the month, when it will be carried out overlapping nails. Polishing is carried out with light longitudinal motion, and be sure to thoroughly remove all dust particles through brush to the nail surface after use.
Degreasing must be carried out necessarily by a special composition, however, if it is absent, then it is quite suitable conventional nail polish remover. In any case, this option is acceptable, but in toga may occur chipping and flaking of the coating surface.
Next you need to apply a primer, but the situation with the use of shellac, this procedure would not be binding. That is, it will serve to maximize adhesion of the coating to the nail plate. It should be noted that after the application of this means no further processing will be required forced under a UV lamp.
This is followed by application of base and at this stage, be sure to brush should be parallel to the nail. Only in this case it will be able to apply a thin layer. It covered the entire surface of the nail plate, after which you need to make a fixation of a UV lamp. This procedure does not take a long time, quite literally one minute. When the layer is recorded, you can begin to spray shellac desired color, but unacceptable removal from the surface of the nail plate with adhesive dispersions.
In step shellac coating should use manuals which are relevant for the application of the primary base layer. Apply need the same brush and a very thin layer. Each nail must stay under a UV lamp for ten seconds. In the final stage you need to hold all the fingers under it for a minute. Should apply two layers of the same technology.
Now applying the turn of the fixing layer. It is he who will serve for the reliable protection of manicure against mechanical and other influences throughout his life. At runtime, this work is necessary to see to it that the fixer in any case did not get to the cuticle, as a result, it can lead to erosion of the lacquer. It is meant fixer applying only one layer on each arm. Drying under the lamp at this stage is required and must be carried out within two minutes.
Further, the adhesive layer must necessarily be removed from the surface by means of nail plates degreasing composition. This should be done only after, when the fixing layer is completely hardens. At the final stage of the process is treatment of the cuticle caring means. It you can choose at its discretion, irrespective of the manufacturer.
conclusion
Shellac - a coating that really enjoys great popularity and the reasons for that is quite a lot, but the most expressive of which we spoke at the beginning of the article. It lets you quickly and without complications to make attractive and durable manicureThat is guaranteed to complement your image. If at first you do not all work, then do not despair, you can always try again and again. Experiment and implement their own ideas, good, shellacs range for today is simply huge!
