How do the French manicure without stripes, if the house is no self-adhesive stencils? How to draw the jewelry perfectly smooth and even smile at the free edge? This article describes some simple ways with improvised means by which you can draw on fingers classic design.
Form smile
Neat jacket begins with the same regular shape and polish. The deepest point of the bend is a smile on the center of the nail, and the tails should be at the same height. It is not necessary to lift up their excessively high, otherwise it looks too unnatural, especially for short plates.
Forming a smile, it is important to combine a complete symmetry in bending. All the fingers it should be the same. The rounder and sharper than a fingernail, the more harmonious look deep smile. The most pertinent width is 1/5 of the nail.
Bending smile lines should reflect the curve of the cuticle. If the free edge of a long, making french manicure without strips, it is necessary to lengthen the nail bed. Especially appropriate for short and trapezoidal plates. But the smile with a small bend suitable for short nails square shape.
White color is a warm yellowish midtone and cold with a bluish. Heat can turn yellow, but it is fairly dense. Bluish undertone less dense because of this it is more difficult to draw.
Camouflage
Perfect for a natural color French manicure - a shade between the color of the skin and the nail plate. Too tight a bright tone is unnatural. But recently very fashionable to paint coat in dense pastel colors. Design disadvantage is that with such a camouflage visible cuticle grows. But there is a little secret, how to avoid it:
- First camouflage applied to 2/3 of the nail, leaving a small well.
- Fine brush to shade the remaining unpainted area.
- The second layer to cover only half of the nail and just stretch the brush color.
- A dense shaded transition to the free edge and completely absent from the border of the cuticle.
Looks nice when the joint between the camouflage and a smile as clear.
There are camouflage, which require a large number of layers. But above still need to draw a smile and cover the top, to level design. in the end manicure will be too big. But this is a solution. After application of the camouflage layer, it is necessary flat beveled brush rake lacquer on outlines of a smile. The main thing is not to take over the future width of the white line.
Secrets of the perfect jacket
Top 12 ways how to do a French manicure without stripes
Not necessarily being chased throughout the city for glue stencils. In creating the classic cover help ordinary means at hand, which everyone has.
native brush
Smile can draw an original brush that comes in a bottle of gel varnish. It is recommended to choose the thick white paint.
Application technique:
- First, you need to make a layout on the sides of the nail plate and in the center.
- Dial a little color on the brush and lightly paint the smile line. The trick here is to rotate the finger and wrist while keeping still. Bend it turns much smoother.
- Do not forget to paint the face of a large brush if deep smile. In that case, if the brush from the bottle is missing, it can help thin.
thin brush
When you do not know how exactly to do jacket without stripes, then come to the aid of a thin brush with long bristles.
performance technique:
- Apply color coat to the nails. Should be given the basic shade to dry before the next steps.
- To make the counting and mark width smile.
- Select the nail center, which will be the lowest point and put two points equidistant from it on the same plane - it bends. The closer the points are, the more curved will smile. The method is perfect for long fingernails.
- Mark equal terms on both sides of the side bolsters.
- Join them and complete marking white gel varnish, simultaneously smoothing the corners.
flat brush
Brush can be natural or synthetic. The second gives a clear outline, but leaves on the nail less material. And watery gel nail for it. This method is suitable only for high-viscosity materials.
Flat brush can be made from the native lacquer brush. It is enough to wet it thoroughly in a napkin and a little squeeze on top.
Draw a smile:
- Apply colored layer on the nails.
- Saturate the brush color and draw a vertical line at the side bolsters to be antennae.
- Attach the brush across the plane of the nail and carefully form a smile. It should not be too much material.
- To make the required number of layers to adjust a smooth contour and remove small errors.
- Cover the top.
round brush
How to make a jacket with strips without using a round brush? Very easy. You must choose the model of medium length. Brush capacious, therefore takes a sufficient amount of gel varnish and reserves a smooth even layer.
Emerges a smile:
- Cover nails camouflage. For the density of the color layer is recommended to be duplicated.
- Mark the thickness along the length of the line end, and then start the whiskers to a desired depth to smile line went smoothly to zero.
- Gently rounded corners.
- Figure stamp layer align with the base color.
beveled brush
In such a process it is necessary to remove the gel polish completely, not to smear it on the nail, so as not to get white stains. Brush should be slightly moist.
Each of these tools, you can correct the antennae, making the smooth narrowing of the end of smiles, if suddenly turned thickish or hand trembled.
Equipment is quite simple:
- Apply the tip of the camouflage gel nail slightly wider future smile.
- Beveled brush to remove excess paint.
- Soaked in white gel-coat. Attach a small angle to the nail, gently squeeze and bring smiles circuit.
Dots
It DOTS knows how to do a French manicure without stripes. This method is perfect for home users and for those who are uncomfortable to draw on his right hand. The beauty of the method lies in the fact that there does not need to control the press.
Small oval DOTS convenient mustache drawn deeper.
How to perform design:
- Apply a beige or light pink tone.
- To gel the varnish is not floated and flowed, the camouflage can be removed from the adhesive layer.
- It is worth to make a mini-layout. It is necessary to define the deepest point and the height of the antennae.
- Transfer the white gel polish on the tip and slowly leveled smile DOTS.
- Cover layer thick top.
Patch
The most unexpected, but accessible to all option. The edges of most conventional plasters are perfect round shape. It is an excellent replacement stickers and stencils. Thanks to him, the French manicure without stripes is obtained perfectly flat, even at home.
What you need to do:
- Camouflage cover nail lacquer into 2 layers.
- Mark usual patch and peel the protective film.
- Cover the plate so that the left tip of the nail. It is important to stick the patch only on fully dried paint, otherwise it will act with the base color.
- Apply white paint on the tip, to give it to dry, and gently peel off the patch.
- Cover layer of the top.
Scotch and Scotch tape
Adhesive tape can be cut into thin half-round stripes. If this is hard to do, it needs to stick arched. A Scotch tape - universal nail object with which you can also make a jacket.
Run everything is simple enough:
- Cover nails nyudovym color.
- Stick adhesive tape or Scotch tape on the free edge of the well and press it against the plate.
- A pair of scissors to cut a small margin, so that you can then grasp it.
- White lacquer paint over the nail, without stepping beyond the tape.
- Allow to dry white lacquer.
- Grab the remaining edge and quickly peeled off the tape.
- Top leveling should be selected to be able to cover all the possible errors and good step to align smile.
Peel off
The film, which protects the skin around the nail from the nail with a gradient of help to make the French manicure without stripes.
Necessary procedure:
- Cover nails camouflage color.
- Apply a film on the colored layer so that only the tip was left unpainted.
- When the film is dry, the tip cover with white paint.
- Remove the tape with tweezers and put on the finished design glossy top.
stamping
There is a plate with a pattern that perfectly fit the shape of a smile and perfect for creating a jacket. There plate on which is engraved directly with various shapes and sizes of smiles, they are much easier to work. The nail pattern transferred using the technique stamping polish.
What should be done:
- Cover nails pale pink beige or camouflage.
- On the plate shape smile cause white gel varnish.
- Printed surface of the die plate and carefully transfer the pattern on the nail.
- Cover layer top.
If there is no desired plate, it does not matter. On the die, you can draw a curved line of gel polish or brush and move it to the fingers. On their nails more difficult to draw, especially right-handed on his right hand. And from the die easily create a jacket without stripes.
Gum or bracelet
This method is performed by means of elastic bands for hair or silicone bracelet.
The technique is no big deal:
- Apply a hue to the nails.
- In the middle to make a knot in the elastic band.
- Two fingers tightly covered with a rubber band with different parts, while leaving room for a smile.
- Native white lacquer with a brush to paint over the entire space.
- Cover design top.
