Linens can make yourself at home.
As necessary tissue
In order to make a set of bed linen, you need 7.15 - 7.75 m of fabric.. It is best to use a fabric width of 220 cm. If you choose the fabric 80 or 90 cm. width - will have to sew and quilt cover sheets with secondary suture (sew two lengths), and if you take the fabric width 1.5 m., The width of this may not be enough, or enough to butt, but not enough for seam allowance and shrinkage during washing.
Scheme / istockphoto.com
Cutting and sewing sheets
Sheet must be cut to the entire fabric width. The length is calculated by the formula: length of the mattress (2 m) + 20 cm. To the length of the sheet was a little more, you can add kroyam at least 10 cm., And on the fabric shrinkage in the wash still 4cm. Seam - 230 cm.
Sheets need to cut the entire width of the fabric, and the parties will have the edge. Their process is not necessary, since the edge will not be dismissed, even after numerous washings. After that, the other two sides need to hem to hem 1cm. and again at 1 cm.
Scheme / istockphoto.com
Cutting and sewing a blanket cover
Quilt cover length cut out the entire fabric width, and the width is calculated by the formula: width blankets (170-180 cm.) + 6 cm. Allowance for shrinkage during washing - 1.5 cm, the seam allowance -. 355 - 375 cm.
On the side that 355-375 cm in length. part is formed on the duvet cover in half, inside out. After need to sew on both sides (with an edge) weld width which is equal to the width of the edge. It is necessary to sew just outside the edge, so that it is completely sewn up on both sides, do not forget to leave in the middle of one of the sides of the hole length of 50-60 cm. Through it will be inserted into a duvet cover. The remaining side of the need to sew a seam width of 1.5 cm. and neaten overlocking. Next duvet cover is inverted on the front side. Seam, which hang not fixed, around the hole, you need to fix. To do this, they bend inside duvet covers the width of the edge and the anchoring lines of 1 cm.
Scheme / istockphoto.com
Cutting and sewing pillowcases
From cloth having a width of 220 cm. you can do 3 cushion covers 50x70 cm. or 70x70 cm. The length of the piece is calculated by the formula:
A piece of fabric pillowcases for 50 to 70 cm. = (50 cm. (Pillowcases one side) x 2 + 25 cm. (On podvorot) + 5 cm. (Seam allowance) = 1 m 30 cm.
Scheme / istockphoto.com
Piece for pillowcases 70 x 70 cm. = (70 cm. (Pillowcases one side) x 2 + 25 cm. (On podvorot) + 5 cm. (Seam allowance) = 1 m 70 cm.
Scheme / istockphoto.com
1. It is necessary to cut a piece of fabric the desired length and prokroit.
2. After the sections were treated both short sides (those whose length is 73cm.) Hem seam in 1 cm. and again at 1 cm.
3. Then pillowcases folded so that the face fabric side was inside, and allowance was podvorot above (which is the 25 cm).
4. Pillowcases sewn side seams, weld width of 1.5 cm. and overlock are sewn.
How to sew bed linen. EXAMPLE to scale
Also read about onThe original round rug for the children with their own hands
