Gel compositions have practically superseded standard lacquers from the arsenals of professional craftsmen. Moreover, appreciating home manicure ladies are also being phased out by making short-lived and eventually understand how to make the coating gel varnish at home. It's easy!
Instruments to cover gel polish
Earlier in a home manicure used only conventional malostoykie cover, now, perhaps, the range of accessories necessary to reconsider. Quality work with gel varnish requires some specialized equipment and tools.
Before the start of the coating gel nail lacquer should make sure that the house there are such things as:
- Ultraviolet lamp. The most important tool when using a gel-lacquers in manicure. Required for the polymerization process, ie, for hardening of the coating.
- Buff. With buff polishing is performed qualitative nail plate, which then eliminates delamination of the nail and nail made guarantees durability.
- Tools for degreasing. In the absence of a special composition can be used conventional means to remove the nail polish, but in any case can not do without this fluid. If you do not degrease nails before the procedure cover nail gel polish, it will be poor-quality manicure and quickly begin to lose its appeal.
- Base under the gel coat. The required item for a firm grip of the nail plate with the deposition compositions.
- Masthead coating. Ensures gloss after coating gel nail varnish.
- The liquid for removing an adhesive layer.
- Primer.
- Gel lacquer of different colors.
- for decorative elements.
- Cotton pads, orange stick, cotton swabs.
Having all necessary for qualitative performance gel nail accessories, you can go directly to the application of the composition.
nail coating Gel polish: Stages
To manicure performed using gel varnish or shellac, it was especially durable, should scrupulously comply with all recommendations for the coating. Attention will have to be given to such actions as:
- Prepare nails. At this stage it is important not only to do well hygienic manicure using hardware technology or any other, but also take care about the quality of the nail plate. On the nail should not be peeling, cracking, uneven. It will have to thoroughly work buff, Achieving a matte color instead of the usual gloss on the surface of the nail.
- Degreasing. After the initial training necessary to handle the nails with a special compound and remove all the natural fats. After degreasing is not necessary to touch the surface of the nails.
- Initial coating. The deposition sequence is as follows: Bond primer base. Bond for drying surface; primer as the "priming"; base - first preparatory layer of nail polish. Base layer needs to polymerization, so nails is hold under UV lamp 40-60 seconds.
- Gel Nail varnish coating. The simplest procedure of all. On the nails applied to the selected color, removes all blemishes from the skin. Further polymerization is performed under a UV lamp for 120 seconds. If necessary, the procedure is repeated two or three times.
- Decorating. If you want to supplement manicure rhinestones, Ornaments or other decorations, is to do it right now.
- The last step - drawing the top. The top layer will give manicure durability, but it is not only coated on the surface, but also to seal the nail. Then perform the polymerization under the lamp of 120-180 seconds. Final point - removing the adhesive layer degreasing composition.
Just a short time and make the coating gel nail varnish, but the result surpasses all expectations. That is why the gel manicure is now at the peak of popularity - both among domestic as well as among salon procedures.
