The material was prepared in conjunction with my colleague that the education hairdresser knows about painting a bit more than all ;-)
Often, customers, buying hair dye, no clue: in what proportions to plant, and what all these tsiferki on the packaging. In today's article we will explain how to choose the right color you choose and how to paint oxidant unfortunate gray hair.
The main condition is: choose the right paint, oxide under your hair type, desired color.
It is important to remember that you can not take the paint lighter its original color! Since in any case it turns out uneven color due to the fact that the pigment, which was darker than the (original color) are not fully "released" from the hair.
oxidant
One of the important parameters when choosing a hair dye. Take into account that natural hair is dyed worse, and previously painted end of the intensive, because of what the color is uneven.
Oxides are: 1,5%, 3%, 6%, 9%, 12%.
1.5% oxidant suitable for tinting the hair, if you want to give the shade of hair or, so to speak, to refresh the color.
3% oxidant suitable for dark shades. It is used for a more gentle coloring. We must note that a 3% final color will be darker, but quickly washed away.
6% versatile oxidant that is suitable for any hair. Starting from a 6% oxide are colored gray hair.
If the store no oxide 6%, it is possible to blend 9% and 3% in the same proportions and obtain 6%.
9% -12% oxidants for blondes and bleaching the hair. 12 is used for bleaching hair only, it is not recommended to paint the hair.
Some firms in addition to / instead of percentages indicate the VOL10, VOL20, VOL30, VOL40, so refer to the fortress.
For uniform pitch, can be colored roots of 6%, and the length of - 1.5%, thereby burning the ends of the hair.
What do the numbers on the ink
The first digit to the fraction (or points) denote natural color and is responsible for the level of depth of tone.
"1 /" - Black
"2 /" - very dark brown
"3 /" - dark brown
"4 /" - Brown
"5 /" - light brown
"6 /" - Dark Brown
"7 /" - Medium Brown
"8 /" - light blond
"9 /" - blond
"10 /" - light blond
In some firms there is a "11 /" and "12 /" - this is a super light shades.
A suffix numbers indicate the direction of color. Tone that is "blikovat" final color.
"/ 0" - natural (cold)
"/ 1" - Ash (cool)
"/ 2" - green (warm or cold)
"/ 3" - a golden (warm)
"/ 4" - copper (warm)
"/ 5" - red (warm or cold)
"/ 6" - Purple (cold)
"/ 7" - brown (warm or cold)
"/ 8" - Pearl (cold)
"/ 11" - jet black (cold)
The second digit after the fraction or extra point represents hue, it will be twice lower in color than the core. Some paint manufacturers that extra tint to the main is 30% to 70%.
In order not to get the green shade of hair, in any case, the cold shade of paint can not be warm.
It is very important what you used before, if there was any henna dye, which does not appear even powder.
In order to better penetrate the pigment in white hair, can make predpigmentatsiyu. Dilute permanent (ammonia) paint with water 1: 1 and applied to the gray hair with an exposure of 5-10 minutes. Then rinse, dry and dyed hair is oxide as usual.
To paint gray hair adds more pigment, so it would be better filled with hair as gray hair has no pigment.
Often I hear the question, on the dirty or clean hair coloring must be done.
A: The degree of contamination of hair should be no more than one day, because the secreted sebum (oil) does not penetrate the paint.
To did not stain the skin of the head, the dark hair on the circuit, apply rich cream before painting. And after you have stood the paint, lightly spray head and massage your scalp, thus you prevent staining of the skin.
If you like staining heading of hair and want more useful material - put a "thumbs up" and subscribe to my channel.
If you have questions, you can ask them in the comments to this article, in the message VC group or in direkt in Instagrame.
