The charge to the car needs to be put more quickly, so that temperature drops and frost are poured into the work of the mechanisms. There are also cold start problems.
Yaki dії not varto work at startup car in cold weather ?
№1. Immediately start the starter. Before starting the machine, it is necessary to turn off the ignition, and check for a few seconds. After all the input icons on the accessory panel go out, you can turn the ignition key to the “ON” position.
№2. Do not disengage the clutch pedal before starting, then the starter will change. Pressing on the pedal when starting, the engine “pulls out” from the gearbox, thus making it easier to start.
№3. Anonymous unsuccessful trials. In case, if after a few tries the starter is not sloppy, then do not repeat the varto a lot of times. Such diami can cause flooding of candles. You can hold the ignition key in the START position for no more than 10 seconds, with a small number of steps. Try everything without success, rather get out of the car and find out the reason.
Also read, how to properly warm up a car collection: 4 moments, you didn’t know about yaks
Photo by the article: pixabay.com
