That came to us fairy-autumn. He brought with stocks for the winter, nuts and honey, because the kids are so fond of sweets. But the forest little animals, too, love them. Especially bears. And you know what else love kids? Right! Falling asleep, hugging the warm, soft teddy bear! And if in doing so he has made my mother's loving arms?
So, we need: vintage plush, minishtoff, hollofayber (or sawdust), glass beads, thread, cotton, linen, leather, polymer clay, needles, pins, scissors, pliers, fishing line, a lighter or matches, sewing, wool felting, needle felting.
Before you find details of the future bears, you need to determine the direction of the pile on the fabric and mark it for the convenience of an arrow. The arrows on the fabric and the pattern should look in one direction. Draw out all the details of a pencil or marker disappearing clear on the details. Cut parts with oversize
After Sew all the details, "extra" fabric on the seam will have as close to the seam cut, then the items will be better to turn out and will not jam.
Now collect three Circuits for the head - right, left and middle of the wedge. Fold the right and left of the head, facing each other, the shear pin. The middle wedge starts at the tip of the nose, are putting it face down, with the end of the wedge should dock with the lower corners of the right and left of the head. For convenience, all held together by pins. Carefully sewn parts to restore the contour of the usual dotted seam and try to make the stitches were smaller. Downstairs reserve nezashitoe place for eversion.
Preparing parts for the front legs: the bottom, top and most palms. Cut out of the palm minishtoffa (so-called fabric with a fine pile).
First sew the palm to the upper part, to get a full foot, then add up received the item from the lower part of the face-to-face, flash, do not leave the side of the pro-embroidered place to eversion.
Where the seam is at an angle (front of the lower leg foot) or an arc (elbows forelimb) can be make the cut perpendicular to the seam almost to the cloth after printing is not restive and went folds.
Getting to the hind legs. They have also made up of three parts: right, left and heels. First, we add up the right and left side of the face to face, flash, leaving nezashitoy lower part of the legs (where the heel will be) and place through which to wriggle detail. Next, take the oval pyatochku and attached to the bottom of the foot facing inwards, heels circuit must match the contour of the left and right parts legs, shear pins for easy and sews. To bear could he stand in pyatochku before packing carton, place dense shaped heels.
Now the tabs. They consist of two parts, which we add up face to face, flash, leaving nezashitoy bottom.
After that gut-wrenching.
After lugs bear sew body consisting of two parts, and leave a hole for eversion, after which the starting densely fill the hole left by the items. For stuffing can be used hollofayber or sawdust. Do this carefully so as not to damage the joints. Sew around the circle hole at the bottom of the head and tighten it so that it fell by three-quarters. Leaving the small hole will sew beady eyes.
Introduce needle and fishing line (normal thread does not fit - can tear when utjazhki faces) into the bottom hole and print at the side, where we want, that was glazik, put on a bead on the line and enter the needle a little butt to the place where we have it taken out, and then output through the lower opening head. Leaving the tip of fishing line. The remaining ends of the fishing line, protruding from the head, connect to each other and tighten well to plant deep eyes. Excess fishing line cut and sew up the hole in the head completely.
Now we take the black floss, dressed in a needle is inserted through the bottom head and display in the center of the nose back down a few mil-limetrov right and enter the needle in, derive the same distance from the center, only to have left. And so sews back and forth all our nose to the size what we want.
To spout "convex" and similar to the present, can be stuck on a piece of felt on the snout form and bind it already.
To make the bear's mouth, only need to sew a stitch down and perpendicular to it to make another stitch.
Try symmetrically to sew ears: first pin up their head and pins to adjust the height of our desire. Sew a secret seam ears.
Once the ears are fixed on the head bears, came the attachment of the head to the calf. We sew it.
Now we do legs. To sew the top, we will need on the buttons on each paw.
Take the thread with a long needle and make a loop on the button, skip the needle through the first leg, the second leg and the body, putting a button on the second leg and missing needle through the first hole buttons, then go back with a needle through the second opening buttons, leg, body and the first leg, so sewn several times to strength. Exactly the same as the top, sew the lower legs.
So, our bear is ready! It has movable legs, and he can sit and stand without the aid of supports. Now along it, for example, in the Scandinavian traditional clothing.
As we take the hair wool for felting and a top privalivaem special needle: it turns parting, then these strands can braid in braids.
Details shirt: the front part, the rear part (rest) Sleeve (2 pcs.), Side wedges (2 pcs.). Because to this day it has not been preserved as much as the ancient Vikings shirts for patterns using conventional cutting practically shirt.
To carve it on the size of bears, we need such measurements. Front and back, we will be in the form of a trapezoid (since my shoulders were very narrow). Dimensions: upper width to shoulder width, bottom width equal to the width of the level tum. Length is the length from the shoulder to the beginning of the foot. Sleeves are we rectangles. Length is the length of the paw from the shoulder to the palm, the width of the rectangle is equal to the circumference of the paw.
Lateral wedges - triangles. Size - on the eye: for example, to expand our shirt, and that it passed the thigh bears.
We make a deep cut in front of arbitrary shape. Rear for easy undressing and fittings make the cut - get a shirt with the smell.
Hangerok (similar sundress with an apron) - was a common element of female clothes of the ancient Vikings. There are many versions of his breed. We will use one large cloth and a little apron.
It is necessary to cut a rectangular four parts: the main part, the apron, the strap (2 pcs.). The width of the main part of the circumference of the thighs = minus 1.2 cm, length = length from the armpit to the top of the foot. Apron: width - slightly longer shoulder width, length = length from the armpit to the top of the foot. The straps can be done in half a centimeter in width and in length from the base portion to the apron. After cutting parts hemming their perimeter and sew the strap to the main part in the middle, the width between the straps = bears shoulder width. The apron will be pinned with pins, brooches.
Hangerok were only fibulae (brooches) which are fastened the main panel, and apron webbing. Often it was the fibula in the form of a bear's head. For our Byrne sculpt them out of polymer clay and glue to the usual pins and collect together all hangerok.
It is also an important element - glass beads worn around the neck and between the fibula, the number of beads and other decorations could determine the status of women. Cut bear leather belt (just a long strip of leather) and a leather purse for coins, a circle of skin and tighten the thread of the circle.
