So we waited for the sun and heat. However, at noon on the sunny side of excess light, and very hot. To protect from sunlight using curtains, blinds, shutters, natural and plastic straws. They come in different colors, sizes, designs and, of course, are not cheap.
We choose curtains of dense tissue and picked up a few, in our opinion, the most successful of simple options to make them yourself.
Roman blinds does not require advertising in the public domain worldwide network of many detailed master classes on their creation. It is worth noting that they are more difficult to manufacture than the blinds, do not fold into a roll, and the rise in the form of rigid folds.
Tailoring requires more time, the presence of sewing skill, patience and precision in the calculations. Blind consists of two layers of fabric on the inside of the folds do with a certain interval, otstrachivayut, inserted strips, rings sewn into which the cords are threaded. Using the scheme, the skilled worker will make the calculation, depending on the size of the window.
Our roller blind will also be a two-layer, so you need to pick up the companion fabric for the inner and outer side. The size of canvas to the width of the window plus a three centimeter length equal to the length of the window plus ten centimeters.
And two required wooden or plastic strips and a width of two centimeters and a length equal to the width of the curtain (one for the top and the other - to bottom) five rings, screws and three hooks, screws, two round of strong non-slip rope (a length of three times the length of the curtains, the other - three times the length of the curtains plus the width of the curtains).
Sew the edges of paintings from the inside out on three sides, turn, turn in and sostrochim fourth side. Fold the wrong side of the upper edge to three centimeters, the lower edge of one and a half centimeters, pave the stitch insert strip. The top bar and with an end face of the screw in two ring-screws at approximately ten centimeters from the side edges. Fifth Ring Screw Screw in, stepping back from the edge of five centimeters.
Cords are threaded through the rings, clasping the curtain on the front and reverse side, as shown in Figure (longer - to far ring) derive together via lateral ring. Curtain hung on two hooks, screws, screwed into the frame, fix the roll by winding the cords on the third hook and a screw disposed on the frame side.
The simplest roller blind does not require any rings or screws! Only need fabric for the roll of tape and a broad, equal to twice the height of the window plus from half a meter to a meter in addition to a beautiful bow. The tape is worn across the upper bar and supports the curtain rolled up. lift degree is adjusted manually, it will have to unwind or roll to roll, untying and tying the ribbon.
You can make the curtains in the form of straight blades with loops on the bottom corners or one loop at the bottom. Instead textile loops metal rings are ideal. The aperture is opened manually, by fixing hinges on certain lateral hooks attached to the frame at different heights
Round and flat blinds not necessarily secured with screws, sufficient strength has conventional sewing "Velcro". One part is glued to the surface of the frame, the other - on nastrachivaetsya curtain. Here's another interesting idea: a curtain hanging on the ledge, a band attached to the cross seam and allows you to turn off the roll and do the drapery if necessary.
Also be sure to ask about how to make an amazing stained glass window with his hands
Photos from public sources
